Modern automatic winding machine with the progress of science and technology its function and control has become more powerful and reliable, compared to the traditional winding machine performance is more outstanding, the work efficiency has also been greatly improved, as a set of CNC, photoelectric , Pneumatic and a series of new technology applications of equipment, its structure and function of the complexity is also increasing, this article on the automatic winding machine common parameter setting method for a brief introduction.
First, from the point of setting
Automatic winding machine from the point of winding is the starting point of the starting line of equipment, is the spool and the winding between the skeleton of a distance parameter, the parameters determined by the specific winding process, winding machine generally has a real-time measurement Function, which can be measured in the measured data around the point can also be calculated by manual way from the point of the data obtained, set the parameter is the need to pay attention to figure out the direction of cable equipment, cable direction And set the correct point from the point of no direct relationship, to ensure that the set from the winding point with the winding process.
Second, the winding width of the set
Wide and simple understanding is from the point of winding to the end of the winding distance, the same is the distance of the skeleton of the winding, the width of the frame need to consider the actual set of deformation, deformation of the skeleton to be serious deformation The amount of correction value, the wide value can also be set with the help of the measurement function of the winding machine to complete the measurement of the skeleton is necessary to select a certain number of targeted skeleton for the measurement, the comprehensive measurement of data to set around Line width.
Third, the winding diameter of the set
Wire diameter is the meaning of the coil used in the enameled wire diameter, wire diameter of the correct settings determine the winding machine can be normal cable, should be based on the actual diameter plus 0 to 5% diameter correction, the use of copper and Aluminum wire is very different, because the different settings of their different materials, the use of copper wire diameter correction value can be appropriately reduced, the use of aluminum, the tension should be set with the value to adjust the diameter correction .
Fourth, the other commonly used parameter settings
Automatic winding machine common set parameters are automatically activated, automatic homing, layers of stop, slow and a series of auxiliary functions, these functions need to be based on the user's actual winding process to work with, tension device in the winding The machine also plays an important role in the tension set properly can make the coil system is more docile and beautiful, and vice versa set tension will appear stripping paint, change the electrical characteristics of the coil.
When users are familiar with the method of setting the device parameters should be combined with the characteristics of their own winding products to adjust the device, set the method is not static, flexible combination of applications, the user should be summed up in actual use, so as to better Automatic winding machine to play the efficiency and role.